Skip to main content
OrdersCart
ProductsBusiness OptimizationSupport and DownloadsCompany
Cart

Standard fixings for support systems

Standard fixation elements for modular support systems – clips, couplers, clamps, threaded rods, air duct fasteners, bolts, nuts, screws and more

15 Products

Filter
undefined

MT-ZW OC Flat washer

Description
Flat washer for fastening pipe rings to strut trapeze, for outdoor use with low pollution
Material composition
Q235 or better steel
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
undefined

AM

Description
Galvanised threaded rod with 4.8 steel grade
Fire resistance (yes/no)
No
Material composition
Steel grade 4.8 - DIN 976-1
Surface finish
Indoor Coated - Electro galvanised
undefined

AM

Description
Galvanised pre-cut lengths of threaded rod with 4.6 steel grade
Material composition
Steel grade 4.6
Surface finish
Indoor Coated - Electro galvanised
Load range
Light-duty
undefined

Hex coupling nut

Description
Galvanised hexagonal coupling nut for extending threaded rods
Material composition
Steel
Surface finish
Indoor Coated - Electro galvanised
Load range
Light-duty
undefined

Galvanised grade 8 hexagon nut DIN 934

Description
Galvanised grade 8 hexagon nut corresponding to DIN 934
Material composition
Steel grade 8
Surface finish
Indoor Coated - Electro galvanised
Load range
Medium-duty
undefined

HDG grade 8 hexagon nut DIN 934

Description
Hot-dip galvanised (HDG) grade 8 hexagon nut corresponding to DIN 934
Material composition
Steel grade 8
Surface finish
Outdoor Coated - HDG
Base material type
n/a
undefined

A4 hexagon nut DIN 934

Description
Stainless steel (A4) hexagon nut corresponding to DIN 934
Required material grade
A2, A4
Material composition
Stainless steel A4-70
Surface finish
Outdoor Plus - Stainless Steel
undefined

Galvanised hexagon screw DIN 933

Description
Galvanised hexagon screw corresponding to DIN 933
Material composition
Steel grade 8.8
Surface finish
Indoor Coated - Electro galvanised
Load range
Medium-duty
undefined

AM threaded rod - Steel grade 4.8 (HDG)

Description
Hot-dip galvanised (HDG) threaded rod with 4.8 steel grade
Material composition
Steel grade 4.8
Surface finish
Hot-dip galvanized
Base material type
n/a
undefined

HDG flat washer ISO 7089

Description
Hot-dip galvanised (HDG) flat washer corresponding to ISO 7089
Material composition
Steel - DIN EN ISO 7089
Surface finish
Outdoor Coated - HDG
Load range
Light-duty
undefined

Galvanised flat washer ISO 7089

Description
Galvanised flat washer corresponding to ISO 7089
Material composition
Steel - DIN EN ISO 7089
Surface finish
Indoor Coated - Electro galvanised
Load range
Light-duty
undefined

Stainless steel (A4) flat washer ISO 7089

Description
Stainless steel (A4) flat washer corresponding to ISO 7089
Required material grade
A2, A4
Material composition
Stainless steel A4 – DIN EN ISO 7089
Surface finish
Outdoor Plus - Stainless Steel
undefined

MQZ-L Bored plate

Description
Galvanised bored plate for fire-tested trapeze assembly and anchoring
Material composition
S235JR - DIN EN 10025
Surface finish
Indoor Coated - Electro galvanised
Environmental conditions
Dry indoor conditions (C1) Indoor with temporary condensation (C2)
Products in this group have a published fire resistance rating.
undefined

MQZ-L-R Bored plate

Description
Stainless steel (A4) bored plate for trapeze assembly and anchoring
Material composition
Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
Surface finish
Outdoor Plus - Stainless Steel
Environmental conditions
Outdoor high pollution (C4 – high / C5)
undefined

MQZ-L-F Bored plate

Description
Hot-dip galvanised (HDG) bored plate for trapeze assembly and anchoring
Material composition
S235JR - DIN EN 10025
Surface finish
Outdoor Coated - HDG
Environmental conditions
Outdoor, low to moderate pollution (C3 / C4 - low)
Back